Welcome to shandong drick instruments co.,ltd

Products

Plastic soft package testing instrument
Location:Index » Printed materials testing instruments » DRK-ZW-P UV Lamp Weatherproof Box
DRK-ZW-P   UV Lamp Weatherproof Box

DRK-ZW-P UV Lamp Weatherproof Box

Product brand:  Drick
Detection project:  UV Lamp Weatherproof
Product video:  
Product documentation:  
Product enquiry:  
Counseling hotline:0531-85868997  0531-85760992

This product is manufactured according to the requirements of the user, and is based on the current ultraviolet aging test standards such as ASTM G 153, ASTM G 154, ASTM D 4329, ASTM D 4799, ASTM D 4587, SAE J2020, ISO 4892. It mainly provides UV aging tests for coatings, adhesives, plastics, roofing materials, printing inks, textiles and other industries to assess the adaptability and durability of the samples, or to evaluate the behavior of the samples. It is an indispensable important test method for the whole process of new product development, prototype test and product qualification test.

Product details

This product is manufactured according to the requirements of the user, and is based on the current ultraviolet aging test standards such as ASTM G 153, ASTM G 154, ASTM D 4329, ASTM D 4799, ASTM D 4587, SAE J2020, ISO 4892. It mainly provides UV aging tests for coatings, adhesives, plastics, roofing materials, printing inks, textiles and other industries to assess the adaptability and durability of the samples, or to evaluate the behavior of the samples. It is an indispensable important test method for the whole process of new product development, prototype test and product qualification test.

 

Product Characteristics

1. Irradiation/condensation/water spraying test can be carried out separately, and any combination of radiation/condensation/water spraying test can be programmed.

2. Provide comprehensive and detailed real-time monitoring and curve recording for important test parameters such as irradiance, temperature and time (controller with recorder function).

3. The system has good stability, surveillance, operation and maintenance.

4. Provide life reference for imported ultraviolet lamp tubes with expensive materials (lamp tubes are consumables, life is about 1600 hours). It is convenient for users to confirm the replacement time of lamp tubes and save the use cost. The irradiance can be measured and controlled by equipping the irradiance measuring and controlling device (solar eye), so that the irradiance can be automatically stabilized at the set value, and the service life of the lamp tube can be greatly prolonged.

5. Automated water supply and drainage design is adopted, and high-power mercury water with high cost is used to ensure the flow rate and uniformity of water spraying.

6. Most of the major components adopt international brands, while a small part adopt domestic brands, which improves the safety and reliability of products. (See attached list of main accessories for details.)

7. Installation and wiring of electrical parts of equipment shall be carried out in accordance with international electrical standards.

8. The products meet the test standards and methods of ASTM G 153, ASTM G 154, ASTM D 4329, ASTM D 4799, ASTM D 4587, SAE J2020, ISO 4892, etc.

9. Perfect professional after-sales service.

 

Technical Parameters

Ø Equipment Name: UV Lamp Aging Test Chamber

Ø Model: ZW-P

Ø Temperature and humidity control instrument : Yudian LED intelligent controller

Ø Dimensions: 1300mm × 500mm × 1460mm length * width * height

Ø Studio size: 1140mm × 400mm × 380mm length * width * height

Ø Standard test piece size: 75 × 150mm, a total of 24

Ø The center distance of the tube is: 70mm

Ø Center distance between test article and lamp: 50±3mm

Ø Wavelength range UVA340 wavelength range: 315~400nm, peak value is around 340

Ø UVB313 has a wavelength range of 280~315nm and a peak value of around 313.

Ø Temperature range Normal temperature: +10~70°C adjustable

Ø Temperature resolution: 0.1°C

Ø Temperature fluctuation: ±0.5°C

Ø Temperature uniformity: ±2°C

Ø Housing material: stainless steel (or cold plate spray)

Ø Studio material: SUS#304 stainless steel plate.

Ø Wiring method in accordance with international electrical standards

Ø Protection device: Over temperature protection, humidification and water shortage protection

Ø Power supply:  AC220V/50Hz/4.5KW

Ø Weight about: 150kg

 

Main Accessories List

1. Temperature control

2. Ultraviolet Lamp Tube Q-LAB USA

3. AC contactor Shanghai Delicious Group

4. Intermediate relay OMRON, Japan

5. Timer

6. Over temperature protection

7. Solid State Relay SSR Taiwan Yangming FOTEK

8. Temperature Sensor, Xuan Rong, Taiwan

9. Leakage Switch Shanghai Delicious Group

 

Conditions of use of equipment

1. Power requirements

Voltage 220V + 10%, single-phase three-wire system, 50/60Hz, current 8A.

2. Environmental requirements

The working environment temperature is 5-35 C and the humidity is 0-80% RH. The laboratory is well ventilated, the level of the site is good, there is no strong electromagnetic interference, no high concentration of dust and corrosive substances, no direct sunlight or other heat source radiation. Keep away from combustibles and explosives.

3. Other requirements

The work area is about 234 x 353 cm. Water supply and drainage equipment are needed near the equipment.

4. Quality Assurance System

The company strictly complies with the requirements of ISO 9001 quality management system, ISO 14001 environmental management system and European CE product certification.

Equipped documents and accessories

5. A Certificate of Product Qualification

6. A Product Instruction

7. A Instruction for the Use of Control Instruments

 

After-sales Technical Service

1. Under the condition of abiding by the precautions, installation and use rules of the product, the product will be guaranteed free of charge within two years from the date of shipment due to the quality of the product itself, and will be responsible for lifelong maintenance service.

2. The imported ultraviolet lamp tube belongs to the normal test consumables. The ultraviolet radiation emitted by the imported ultraviolet lamp tube will be greatly reduced after its life is exhausted. It is not covered by two-year free warranty.

3. If there is a quality problem in the product, the telephone reply should be made within 15 minutes after receiving the call (or fax) for repair. If the problem can not be solved in the phone, the professional maintenance personnel of our company will come to the door within 24 hours to deal with it.

4. Our company provides free product use, maintenance consultation and technical consultation services for users for a long time. Our company has a special training department, which regularly trains technicians, salesmen and customer users to troubleshoot equipment failures for users in the shortest time and ensure the smooth progress of users'work.

5. Provide spare parts for a long time outside the warranty period, and the charging standard is reasonable (the corresponding fee is only charged according to the cost price of spare parts outside the warranty period).

 

 

 

 

 

 

 


About Derek
Company profile
Organization
Development event
Honor
Product Center
Printed materials testing instruments
Plastic flexible packaging testing instruments
Paper and packaging testing instruments
Industrial testing equipment
Imported testing equipment
Assistive devices
Australia IDM Products
News and information
Company news
Solution
Industry information
Common problem
Application industry
Paper and Packaging Industry
Food industry
Pharmaceutical industry
Quality inspection
Scientific research
Medical apparatus and instruments
Detection service
Laboratory introduction
Test items
Data activity comparison

Copyright 2013@Shandong Derrick Instrument Co., Ltd. Record number: Lu ICP 12028852 Excellent provider of packaging testing equipment and testing services.

X Manager Liu
Manager Zhang
  Online